Press "Enter" to skip to content

Tower Installed

By Bob Wanek N2ESP on 09/27/2016

Our trusty tower team consisting of John, KI4UIP; Donn, N4KII and Dave KR4U were at it again. Today (9/27) the tower tilt mechanism was mated with the telescoping tower. The tower mounts to the base with two large bolts that also serve as hinges when the tower goes from horizontal to vertical or vice versa. Once the third leg is bolted to the base, the tower can then be extended to a raised height of approximately 54 feet.

Final installation details include adding tower grounding, installing the rotor, mast, and antenna followed by coax and rotor control cables.

 

twr1
Tower retrieved from “storage.”
twr3
Tower jockeyed into position
twr4
Tower being cranked up
twr5
Finished tower base
twr6
Tower Installed waiting for antenna

 

 

Related Images:

Published in Club Station, Secretary’s Minutes and Station Building

Bob Wanek N2ESP
Bob Wanek N2ESP

Originally licensed as WN2JTL in 1968. License and interest lapsed until 1984 when relicensed as N2ESP. I currently hold an Extra class license and a BSEE from the Florida Institute of Technology. I am past President of the St. Petersburg Amateur Radio Club (SPARC) and trustee of W4TA, the club’s contest station. I’m also a member of Florida Contest Group, an ARRL Volunteer Examiner, member of the ARRL A-1 Operator Club, frustrated DXer, 10-10 member (40586) and charter member of the Radio Shack Battery of the Month Club. Station QTH is a small island (USi: FL285S Coquina Key) on the shores of Tampa Bay (Pinellas County / EL87qr). Station consists of an Elecraft K3/P3 (100W) into a ZeroFive GP-1040 Vertical/Ground Plane or an 80M Horizontal Loop. QSL via LoTW.

More from Club StationMore posts in Club Station »
More from Secretary’s MinutesMore posts in Secretary’s Minutes »
More from Station BuildingMore posts in Station Building »
WP2Social Auto Publish Powered By : XYZScripts.com